NETWORK RELIABILITY TEST

Packet loss test

Check failed browser requests, latency and stability. This HTTP test is not a raw network-packet capture.

Packet loss—%Not tested

Awaiting samples30 browser requests per run

ClientBrowser

Requests sent0

Verified0

DestinationNot tested

Ping— ms

Jitter— ms

Requests sent0

Requests received0

Test duration— sec

Request delivery heatmap

30 samples

ReceivedLostWaiting

Request completion

Received 0
Failed 0
Pending 30

What does my result mean?

Run the test to analyze transmission reliability for common online activities.

Web browsingReady to test

Streaming 4KReady to test

Online gamingReady to test

Video callsReady to test

Results are stored anonymously for aggregate statistics.

METHOD AND TROUBLESHOOTING

What this online packet loss test actually measures

The test sends 30 HTTP requests from your browser to the Internet Analysis endpoint. The displayed loss percentage is the fraction that fails or times out. It is an application-level reliability check, not a raw UDP or ICMP packet capture. TCP can recover lost network packets before the browser notices them.

How to interpret 0% or a failed sample

Zero failed requests means all 30 completed in this short run. It does not prove that your network has zero packet loss all day. One failed request out of 30 is about 3.3%; a timeout, server error or interrupted browser connection can cause it. Repeat before drawing conclusions.

Find whether the problem is Wi-Fi, the device or the ISP

Run the test with heavy downloads and uploads paused.
Repeat on the same device over Ethernet. If only Wi-Fi fails, investigate signal and interference.
Compare a second device and repeat at the time the problem normally happens.
Check the affected game or calling app too: its endpoint and protocol differ from this browser test.
Save the actual sample count, duration and time of each run before contacting your provider.

Troubleshoot packet loss with good download speed · Understand jitter · Run the full connection-quality test

Measurement reference: IETF RFC 7680 defines IP-layer one-way packet loss; this browser check is a different measurement. See our methods and limitations. Reviewed September 10, 2026.